PRODUCTS

ARCOSOLV DPM

CAS Number: 34590-94-8
EC Number: 252-104-2
Molecular Formula: C7H16O3
Molecular Weight: 148.2

ARCOSOLV DPM is propylene glycol ether solvent.
ARCOSOLV DPM possesses low toxicity, mild, pleasant odor, low vapor pressure and slow evaporation rate.

ARCOSOLV DPM provides good solvency for a wide variety of resins including acrylic, epoxies, alkyds, polyesters, nitrocellulose and polyurethanes.
ARCOSOLV DPM is designed for adhesive applications.

ARCOSOLV DPM is a colorless, liquid with low toxicity having a mild, pleasant odor.
ARCOSOLV DPM is completely water soluble, miscible with a number of organic solvents and has good solvency for a number of substances.

Uses of ARCOSOLV DPM:
ARCOSOLV DPM is a colorless, combustible liquid with low toxicity having a mild, pleasant odor.
ARCOSOLV DPM is completely water soluble, miscible with a number of organic solvents and has good solvency for a number of substances.
ARCOSOLV DPM and blends are effective substitutes for many ethylene glycol (E-series) ethers.

Adhesives & Cements
Agricultural Chemicals
All Purpose Cleaners
Cleaning Compounds
Coalescing Agent
Conditioners
Coupling Agent
Electronics
Flexographic Printing Ink Solvent
Floor Cleaners
Floor Polishes
Gravure Printing Ink
Grease Cleaners
Green Products
Hard Surface Cleaners
Ink Solvent
Metal Cleaners
Paint Solvent
Paint Strippers
Silk Screen Printing Ink
Solvent
Textile
Wax Strippers

Applications of ARCOSOLV DPM:

Coatings:
ARCOSOLV DPM provides good solvency for a wide variety of resins including acrylic, epoxies, alkyds, polyesters, nitrocellulose and polyurethanes.
ARCOSOLV DPM has a relatively low vapor pressure (volatility) and evaporates at a slow rate.
Key properties of ARCOSOLV DPM for coating applications include complete water miscibility and good coupling ability.

Cleaners:
Surface tension reduction and slow evaporation are some of the benefits of using ARCOSOLV DPM in cleaning formulations.
DPM has a low odor and slow evaporation rate.

ARCOSOLV DPM is a good choice for wax strippers and floor cleaners which are spread over a large area.
When ARCOSOLV DPM is used in an enclosed area, a floor cleaner containing a fast-evaporating solvent might produce an undesirable amount of solvent vapor.
ARCOSOLV DPM provides good solvency for polar and non-polar materials.

Other Applications of ARCOSOLV DPM:
The properties listed in the previous section also support the use of ARCOSOLV DPM in agricultural, cosmetic, electronic, ink, textile and adhesive products.

Storage of ARCOSOLV DPM:
General industry practice is to store ARCOSOLV DPM in carbon steel vessels.
Avoid contact with air when storing for long periods of time.

Store only in tightly closed, properly vented containers away from heat, sparks, open flame or strong oxidizing agents.
Use ARCOSOLV DPM only non-sparking tools.

Ground containers before beginning transfer.
Electrical equipment should conform to national electric code.

Handle empty containers carefully.
Combustible e residue remains after emptying.

Store in properly lined steel or stainless steel to avoid slight discoloration from mild steel.
Glycol ethers should never be stored or handled in copper or copper alloys.
ARCOSOLV DPM may absorb water if exposed to air.

Store ARCOSOLV DPM only in tightly closed, properly vented containers away from heat, sparks, open flame and strong oxidizing agents.
Storage under nitrogen atmosphere is recommended to minimize possible formation of highly reactive peroxides.

Store ARCOSOLV DPM in properly lined steel/stainless steel to avoid slight discoloration from mild steel/copper.
Aluminum (5000 series alloys - U.S. Aluminum Association Standard) showed no corrosion after 30 days contact with ARCOSOLV PM Acetate, ARCOSOLV DPM, TPM, PTB, or PM at 71°C (160°F).

Some plastics/rubbers are attacked by Glycol Ethers/Ether Esters.
ARCOSOLV DPM will absorb water if exposed to air.

Handling and Storage of ARCOSOLV DPM:

Handling of ARCOSOLV DPM:
For industrial use only.
Keep container tightly closed when not in use.

The potential for peroxide formation is enhanced when these solvents are used in processes such as distillation.
Use only non-sparking tools.

Properly ground containers before beginning transfer.
When transferring propylene glycol ethers with flash points at or below 60 ºC (140 ºF) into fixed site vessels, the vessel should be purged and inerted prior to transfer.

Propylene glycol ethers may be transferred into air atmospheres if the temperature of the product and the ambient temperature within the shipping container are both at least 16.7 ºC (30 ºF) less than the product's flash point.
After loading, nitrogen blanketing is required if the contents of the transportation container could exceed a temperature of 16.7 ºC (30 ºF) less than the product flash point during any subsequent transportation activities.

If ARCOSOLV DPM flash point is less than 16.7 ºC (30 ºF) above either the ambient temperature of the transportation container or the storage temperature of the product, the container should be purged and inerted with nitrogen prior to loading and nitrogen blanketed after loading.
Handle empty containers with care.

Flammable/combustible residue remains after emptying.
The purging of all empty shipping containers, regardless of the flashpoint, is recommended when received with air atmospheres.

Isolate, vent, drain, wash and purge systems or equipment before maintenance or repair.
Use adequate personal protective equipment.
Observe precautions pertaining to confined space entry.

First Aid Measures of ARCOSOLV DPM:

General:
After adequate first aid, no further treatment is required unless symptoms reappear.
If you feel unwell, seek medical advice.

Skin:
Remove contaminated clothing as needed.
Wash skin thoroughly with mild soap and water.

Flush with lukewarm water for 15 minutes.
If sticky, use waterless cleaner first.
Seek medical attention if discomfort persists.

Inhalation:
If overcome by exposure, remove victim to fresh air immediately.
Give oxygen or artificial respiration as needed.

Obtain emergency medical attention.
Prompt action is essential.

Eye:
Thoroughly flush the eyes with large amounts of clean low-pressure water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
If irritation persists, seek medical attention.

Ingestion:
If large quantity swallowed, give lukewarm water if victim completely conscious/alert.
Do not induce vomiting.

Risk of damage to lungs exceeds poisoning risk.
Obtain emergency medical attention.

Safety and Handling of ARCOSOLV DPM:
ARCOSOLV DPM is classified as a combustible liquid.
Undue exposure or spillage should be strictly avoided as a matter of good practice.
Refer to the Material Safety Data Sheet for ARCOSOLV DPM for more specific information.

Toxicological Evaluation of ARCOSOLV DPM:
ARCOSOLV DPM has a low degree of acute toxicity and is a slight eye irritant.
OSHA has established a 100 ppm TWA for inhalation with a notation that DPM may be absorbed through the skin.
No skin absorption hazard has been found.

Potential Health Effects of ARCOSOLV DPM:

Routes of Exposure:
Eye Skin.
Inhalation.

Slight eye irritant.
Contact may cause mild skin irritation.

This material may be absorbed through the skin.
Excessive exposures may affect central nervous system (CNS), cause skin irritation and produce anesthetic or narcotic effects.

Identifications of ARCOSOLV DPM:
CAS Number: 34590-94-8
ChEMBL: 3182921
ChemSpider: 23783
ECHA InfoCard: 100.047.353
EC Number: 252-104-2
PubChem CID: 22833331
UNII: RQ1X8FMQ9N
Product Name: ARCOSOLV DPM
Product Number: 000000000000499027
Internal ID: 1128
Chemical Family: Propylene Glycol Ethers
CAS Number: 34590-94-8
Chemical Name: Dipropylene Glycol Monomethyl Ether
Synonyms: DPM, Dipropylene Glycol Methyl Ether, DPGME
Chemical Name: Methoxy Propoxy Propanol
Chemical Family: Propylene Glycol Ether
Chemical Formula: C7H16O3
Chemical name: Dipropylene glycol monomethyl ether
Chemical composition: Dipropylene Glycol Methyl Ether
Cas number: 34590-94-8

Properties of ARCOSOLV DPM:
Density (pounds per gallon at 25'C): 7.9
Evaporation Rate (BuAc = 100): 2
Flash Point (Tag Closed Cup) 'C('F): 75(167)
Solubility by weight in water at 20'C: Complete
Solubility Parameter (Total Hansen): 10.0
Specific Gravity @25/25'C: 0.95-0.953
Surface Tension (Dynes/cm) @ 25'C (77'F): 28
Refractive Index @ 25'C (77'F): 1.422
Viscosity (centistokes) @ 25'C (77'F): 3.6
Vapor Pressure @ 25'C (mm Hg): 0.2

Physical and Chemical Properties of ARCOSOLV DPM:
Appearance: Liquid. Clear, colorless.
Odor: Ether-like odor.
Odor Threshold: No value available.
pH: No Data Available.
Boiling Point/Boiling Range: ~ 180 °C (356 °F) @ 760 mm Hg
Freezing Point/Melting Point: ~ -80 °C (-112 °F)
Flash Point: ~ 75 °C (167 °F) (TCC)
Auto-ignition: No Data Available.
Flammability: OSHA/NFPA Class IIIB combustible liquid.
Lower Flammable Limit: No Data Available.
Upper Flammable Limit: No Data Available.
Explosive Properties: No Data Available.
Oxidizing Properties: No Data Available.
Vapor Pressure: ~ 0.4 mm Hg @ 25 °C (77 °F)
Evaporation Rate: ~ 0.02 (butyl acetate = 1)
Relative Density: ~ 0.95 @ 25 °C (77 °F)
Relative Vapor Density: ~ 5.1 @ 16 - 32 °C (60.8 - 89.6 °F) (Air = 1.0)
Viscosity: ~ 4 mPa.s @ 25 °C (77 °F) (Brookfield).
Solubility (Water): Complete (In All Proportions).
Partition Coefficient (Kow): No Data Available.

Molecular Weight: 148.20
XLogP3: -0.1
Hydrogen Bond Donor Count: 1
Hydrogen Bond Acceptor Count: 3
Rotatable Bond Count: 5
Exact Mass: 148.109944368
Monoisotopic Mass: 148.109944368
Topological Polar Surface Area: 38.7 Å²
Heavy Atom Count: 10
Complexity: 75.3
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 2
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes

Synonyms of ARCOSOLV DPM:
1(or 2)-(2-Methoxymethylethoxy)propanol
ARCOSOLV DPM
DPM
Dipropylene Glycol Methyl Ether
Dowanol DPM
EBJ 105
Forguard M
Glysolv DPM
Hisolve DPM
Kino-red
Methoxypropoxypropanol
Methyl Dipropasol
Methyl Propylene Di Glycol
Oxybispropanol Methyl Ether
PPG-2 Methyl Ether
ARCOSOLV DPM
ARCOSOLVe DPM
Bis-(2-methoxypropyl) ether
Dipropylene glycol methyl ether
Dowanol 50b
Dowanol DPM; DPGME; DPM
Icinol DPM
Oxybispropanol, methyl ether
Poly-solv DPM
PPG-2 methyl ether
2-(2-Methoxypropoxy)-1-propanol
Arcosolv DPM
Arcosolve DPM
Bis-(2-methoxypropyl) ether
Dipropylene glycol methyl ether
Dowanol 50b
Dowanol DPM
DPGME
DPM
Icinol DPM
Oxybispropanol methyl ether
Poly-solv DPM
PPG-2 methyl ether
2-(2-Methoxypropoxy)-1-propanol
2-(2-methoxypropoxy)propan-1-ol
Dipropylene glycol methyl ether
13588-28-8
1-Propanol, 2-(2-methoxypropoxy)-
2-(2-methoxypropoxy)propanol
2-(2-METHOXYPROPOXY)-1-PROPANOL
2-(2-methoxy-propoxy)-propan-1-ol
Glycol Ether DPM
SCHEMBL16073
12002-25-4
Glycol Ether DPM Reagent Grade
dipropyleneglycol monomethyl ether
DTXSID80864425
MFCD19707082
AKOS037648698
NCGC00090688-04
BS-15252
CS-0154037
FT-0625302
D81108
J-019668
J-520393
Q2954819